AMX Enova AVX-400, Operation/Reference Manual, Page: 46 / 50

Programming
38 AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
Serial Commands (Cont.)
TON Set an individual tone band to a specified level.
Syntax:
TON<band>=<level>
Variable:
band = tone band (1-7): (1=100Hz, 2=250Hz, 3=500Hz, 4=1KHz, 5=2.5 KHz, 6=5KHz, 7=10KHz)
level = the decibel level setting between -20 and 20
Example:
TON4=-6,$0D
Sets the 1KHz tone band to -6dB.
TON? Queries the current tone band settings; returns the current tone band settings.
Syntax:
TON?
Sample Output:
1=18dB
2=10dB
3=2dB
4=-6dB
5=1dB
6=10dB
7=15dB
TON+ Increase the tone band by 0.5dB
Syntax:
TON<band>+
Variable:
band = tone band (1-7): (1=100Hz, 2=250Hz, 3=500Hz, 4=1KHz, 5=2.5 KHz, 6=5KHz, 7=10KHz)
Example:
TON3+,$0D
Increases the 500Hz tone band by 0.5dB.
TON- Decrease the tone band by 0.5dB
Syntax:
TON<band>-
Variable:
band = tone band (1-7): (1=100Hz, 2=250Hz, 3=500Hz, 4=1KHz, 5=2.5 KHz, 6=5KHz, 7=10KHz)
Example:
TON6-,$0D
Decreases the 5KHz tone band by 0.5dB.
UMT Turns off the audio/video mute.
Note : This command cannot be implemented on HDMI Passthru wallplates.
Syntax:
UMT,$0D
VEQ Sets the video EQ for the source input
Note : This command cannot be implemented on HDMI Passthru wallplates.
Syntax:
VEQ<input>=<eq>
Variable:
input = source input (1-4)
eq = the EQ level setting between 0 and 120
Note: The number you enter for the EQ setting should correspond to a percentage between 0 and 100. For
example, an EQ setting of 60 corresponds to a percentage of 50.
Example:
VEQ4=30,$0D
Sets the EQ level on source input 4 to 30, or 25%.