AMX Enova AVX-400, Operation/Reference Manual, Page: 42 / 50

Programming
34 AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
Serial Commands (Cont.)
BGN Sets the blue gain level for a source input.
Note : This command cannot be implemented on HDMI Passthru wallplates.
Syntax:
BGN<input>=<gain>
Variable:
input = source input (1-4)
gain = the blue gain level setting between 0 and 220
Note: The number you enter for the gain setting should correspond to a percentage between 0 and 100. For
example, a gain setting of 110 corresponds to a percentage of 50.
Example:
BGN2=55,$0D
Sets the blue gain level on source input 2 to 55, or 25%.
BMT Toggle the balanced mute
Syntax:
BMT,$0D
BSM Turns on the balanced mute
Syntax:
BSM,$0D
BUM Turns off the balanced mute
Syntax:
BUM,$0D
DCM Triggers a dynamic user command. AMX advises you to place the AVX in passthru mode prior to executing a
dynamic user command. Putting the AVX in passthru mode disables interrogation, and thereby eliminates the
possibility of the polling commands interfering with the dynamic commands you send. Because of this, the AVX
does not filter the responses back from the device, and extra data may be delivered to you.
Syntax:
DCM$0D<text>
Variables:
text = The name of the dynamic command to trigger
Example:
DCM$0DAMX_FREEZE
Note: The dynamic command has to be in the device library for the command to trigger.
DOF Turns off the display
Syntax:
DOF,$0D
DON Turns on the display
Syntax:
DON,$0D