AMX Enova AVX-400, Operation/Reference Manual, Page: 31 / 50

Configuration
23 AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
Adding a Device to the Device Library
If the provided device library does not contain the device you are using, you can add the device to the library manually.
Perform the following steps to add a device to the device library:
1.
From the File menu, select Device Manager Library . The Device Library Manager window opens.
2.
In the Device Selection area, click the Add button. The Add Device dialog opens (FIG. 31).
3.
From the Manufacturer options menu, select a device manufacturer.
4.
From the Device Type options menu, select the type of device you want to add.
5.
Enter the name of the device in the Device Model field.
6.
Click Add Device to add the device to the device library.
7.
Click Save to save the Device Library.
Device Library Manager Options (Cont.)
Device Definition (Cont.)
Add AVX Add a new AVX executable command for the current device. You can add up to 16 AVX-only
commands to a device. Each command specific to the AVX-400 appears in green in the
Commands column. AVX-only commands always begin with "AVX_". If you remove this
prefix from the command name, AMX DCS will no longer view the command as AVX-only.
AVX-only command names have a limit of 10 characters. Command names are case-
sensitive.
Note: If you create more than 16 AVX-only commands, DCS only accepts the first 16
commands.
Delete Deletes the selected command.
Cut Removes the selected command from the command list and stores its information on the
local clipboard for copying.
ASCII to Hex Tool Opens a tool which helps convert ASCII text into hexadecimal code.
Copy Data Only Copies the data from a selected record from the command/status table into memory. The
data can then be pasted onto a command or into any model’s command/status table.
Copy Name/Data Copies a selected record from the command/status table into memory. The record can then
be pasted into any model’s command/status table as long as the name is unique.
Paste Once a selected record from the command/status table is cut or copied press this button to
paste the record into any model’s command/status table as long as the name is unique.
Test Command Click to launch the Test Command Tool so you can send commands and view feedback from
the receiving device.
FIG. 31 Add Device dialog box