AMX Enova AVX-400, Operation/Reference Manual, Page: 22 / 50

Wiring and Device Connections
14 AVX-400 Enova Twisted Pair Presentation Switcher Operation/Reference Guide
HD-15 Output Connectors
Each AVX-400 has two HD-15 output connectors. The outputs enable you to use an HD-15 to COMPONENT or HD-15
to RGB/VGA cable to send video to a display device such as a projector or large screen monitor. The output device
displays video from source input devices routing through the AVX-400. There is one output each for COMPONET and
RGB/VGA sources.
The following table lists the pinout configuration for HD-15 connector to RGB/VGA connectors:
FIG. 25 HD-15 Output connectors
Video Output HD-15 Connector Pinouts
Pin Signal Function
1 Red Red signals
2 Green Green signals
3 Blue Blue signals
4 N/C
5
6 RGND Red analog ground
7 GGND Green analog ground
8 BGND Blue analog ground
9
10 SGND Synchronization analog ground
11
12
13 HSYNC Horizontal synchronization signal
14 VSYNC Vertical synchronization signal
15
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
You can use breakout cable CC-HD15M-RCA3M ( FG10-2170-03 ) to connect to 3 x
RCA Phono Sockets.