![background image](http://html1.mh-extra.com/html/amx/dxlink-hdmi-mmf-d/dxlink-hdmi-mmf-d_instruction-manual_2939353107.webp)
Appendix B – Telnet (Terminal) Commands
107
Instruction Manual – DXLink™ Fiber Transmitters and Receivers, Duplex
Telnet Commands (continued)
video
Note:
This command
must be entered in lower
case only.
Note:
This command applies only to the Receiver.
Shows video signal status.
Example:
>video
--------------------------------
Input Video Signal
==================
Input Video
-----------
Video Signal Valid
FreeRun VSIF Not Set
Video Type HDMI
Width 1920
Height 1200
Refresh Rate 60Hz
Scan Type Progressive
Encrypted Video Disabled
InfoFrames
----------
Aspect Ratio No Data
Color Space RGB
Pixel Rep 1x
VIC 2
Deep Color 8-bit
Output Video Signal
===================
Output Video
------------
ScalarMux Manual
Width 1280
Height 1024
VFreq 60Hz
VIC 0
TMDS On
vsif
Note:
This command
must be entered in lower
case only.
Note:
This command applies only to the Receiver.
Shows video VSIF information.
Example:
>vsif
--------------------------------
Decoder
Vendor Specific InfoFrame:
0x81 0x01 0x1C 0x47 0xD0 0x00 0x01 0x02 0x01
0x00 0x01 0x00 0x00 0x03 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0xBD
Packet Type: 0x81
Version Type: 0x01
Length: 0x1C
Checksum: 0xBD (Valid)
Audio Injected: No
3d Video: No
Encryption Status: Not Encrypted
Free Run: Not Set
Video Stream: HDMI