![background image](http://html1.mh-extra.com/html/amx/dxlink-hdmi-mmf-d/dxlink-hdmi-mmf-d_instruction-manual_2939353106.webp)
Appendix B – Telnet (Terminal) Commands
106
Instruction Manual – DXLink™ Fiber Transmitters and Receivers, Duplex
Telnet Commands (continued)
SHOW TCP
Shows the TCP list.
Example:
>show tcp Show TCP List
-------------
The following TCP connections exist(ed):
1: 192.168.43.57:23 <=> 192.168.43.51:51418 (connected)
2: Port:24 (listening)
3: Port:23 (listening)
4: Port:7 (listening)
SHOW UDP
Shows the UDP list.
Example:
>show udp Show UDP List
-------------
The following UDP ports are listening:
1: Port:1319
2: Port:68 (DHCP client)
3: Port:7
4: Port:2222
5: Port:4998
SHOW XG STATS
Note:
This command applies only to the Transmitter.
Displays information about the XG connection.
Example (partial due to length of stats):
>show xg stats
**************** XG Block Information ****************
I2C 8-bit Address: 0x52
I2C 7-bit Address: 0x29
FW Version: 1.0.0.4
FW ID: 0x20A0
HW ID: 0x0000
Interface Version: 0x20
FPGA Version: 0x13
Build Date/Time: Feb 22 2014/13:56:06
TAIL
Note:
Direct use of this command applies only to the Transmitter. Using the TAIL command for
the Receiver requires superuser remote bug access.
Outputs the device log.
TIME
Displays the current time.
VERSION
Displays the version information for the DXLink Fiber device.
Example:
>version
Device: DXLF-MFTX
Serial: 1010560012345678
MAC Addr : 00:60:9f:94:ad:d3
Hardware : 0.1
DXLF Boot: v1.0.4
DXLF App : v1.0.0
DXLF Link: v1.0.0.7