AMX AXT-CV TiltScreen CATP, Instruction Manual

Page: 116 / 146

108 AXCESS Programming Color Active Touch Panels
System Send_Commands (cont.)
Command Description
'
PAGE-<page name>
'
Flip to page with specified page name.
<page name> = 1-20 characters
Example:
SEND_COMMAND TP,
'
PAGE-MAIN PAGE
'
Flips the CATP to the page named MAIN PAGE.
'PKEYP-<number
string>'
Display asterisks (*) for keypad entries.
<number string> = 0-9999
Example:
SEND_COMMAND TP,
'
PKEYP-1988
'
Displays the CATP keypad with **** instead of 1988.
'RESET'
Clear panel status (same as power up). Data stored in
memory is not cleared.
Example:
SEND_COMMAND TP,
'
RESET
'
Resets the CATP.
'
SETUP
'
Go to the Setup page.
Example:
SEND_COMMAND TP,
'
SETUP
'
Flips the CATP to the Setup page.
'SLEEP'
Switch the CATP to screen-saver mode.
Example:
SEND_COMMAND TP,
'
SLEEP
'
Activates the screen-saver mode.
'
#ST<sleep time>
'
Set the time to activate sleep mode for a CATP equipped with
a WAV-PK wireless power pack. When the CATP's input time
matches the sleep time, the panel goes to sleep, wireless
communication stops, and battery discharge is minimized.
<sleep time> = 0 (off) - 150 minutes
Example:
SEND_COMMAND TP,
'
#ST5
'
Sets the wireless CATP's sleep time to 5 minutes.