AMX AXT-CV TiltScreen CATP, Instruction Manual

Page: 90 / 146

82 Touch Panel Program Reference Color Active Touch Panels
•
ENTER Sets the page flip to the new page.
Press the new button to open the page password keypad.
Type
1988
(system default), or your personal page password, and press ENTER to
flip to the new page.
•
CLEAR Clears the keypad number.
•
ENTER Sets the page password number, closes the keypad, and flips to the
new password-protected page. The password-protected page will not open if
you enter the wrong password.
Print
Press the PRINT option to open a decision box and send a printable image of the
current page to a PC via the AXlink or RS-232 connector on the CATP. The PC must
be running TPDOC before you send the print file. Refer to TPDOC instruction
manuals for more information.
•
YES Receives the PC file over the AXlink connector on the CATP, and
opens the decision box in Figure 128.
•
NO Receives the PC file over the RS-232 connector on the CATP and opens
the decision box in Figure 128.
YES NO
PRESS YES FOR BUS
TRANSFER. PRESS NO
FOR RS232 (9 PIN D).
•
YES Sends the print file to the PC bus. The CATP returns to the page
assigned as the startup page when the file transfer is complete.
•
NO Cancels the file transfer and returns to the current page.
When either option is selected, a second print option appears as shown in Figure
129.
PRESS YES TO START.
PRESS NO TO QUIT.
YES NO
Note
You can reset the password
number with the PAGE
PASSWORD button in the
Protected Setup page.
Figure 128
Start or quit decision box
Figure 129
Print option