AMX AVB-RX-DGX-SC Fiber-DVI, Instruction Manual

Page: 23 / 79

Overview and Specifications
19 DGX Transmitters & Receivers Instruction Manual
Compatibility Note:
These modules are compatible only with each other (either TX to either RX)
and with other AMX DGX Signal Management products. DGX Fiber modules are not compatible with
third-party optical distribution amplifiers or multimode to single-mode converters.
AMX reserves the right to modify its products and their specifications without notice.
Product Information Specifications (continued)
SC Cable Bend Radius (max.) 2 in. (5 cm)
Optical Budget 9.75 dBm (typical) between DGX TX and DGX RX
Optical Modulation Amplitude (OMA): -6.25 dBm (typical)
Optical Modulation Amplitude (OMA) Sensitivity: -16.0 dBm (typical)
Power Output of Laser Radiation (max.)
(DGX DVI TX and DGX HD-15 TX only)
4.08 mW
Fiber Connector SC Optical
Analog Video Specifications
TX
Input Signal Types RGBHV, RGBS, RGsB, Y/Pb/Pr
Auto-Adjust Input Yes
DDC/EDID Support EDID provided by DGX TX
EDID is user re-programmable
RGB Input Signal Level Range 0 to 700 mVpp (0 to 750 mVpp max.)
RGB Input Impedance 75 ohm
HV Sync Input Signal Level Range 0 to +5 V
HV Sync Input Impedance 510 ohm
HV Sync Input Trigger Voltage +1.75 V
Y/Pb/Pr Input Signal Level Range 1.0 Vpp for Y
700 mVpp for Pb Pr
Y/Pb/Pr Input Impedance 75 ohm
Input Connector HD-15 (RGBHV and Y/Pb/Pr)
RGB Local Out Signal Level Range 0 to 700 mVpp (0 to 750 mVpp max.)
RGB Local Out Impedance 75 ohm
HV Sync Local Out Signal Level Range 0 to +5 V
HV Sync Local Out Impedance 50 ohm
Y/Pb/Pr Local Out Signal Level Range 1.0 Vpp for Y
700 mVpp for Pb Pr
Y/Pb/Pr Local Out Impedance 75 ohm
Local Output Connector HD-15 (RGBHV and Y/Pb/Pr)
Propagation Delay 2  s
RX
Output Signal Type RGBHV
Output Scaling SmartScale
®
, Presets, Manual Configuration
RGB Output Signal Level Range 0 to 700 mVpp (0 to 750 mVpp max.)
RGB Output Impedance 75 ohm
HV Sync Output Signal Level Range 0 to +5 V
HV Sync Output Impedance 50 ohm
Output Connector HD-15 (RGBHV)
Propagation Delay (typical) 24 ms for progressive; 48 ms for interlace