manualshive.com logo in svg

AMT Datasouth Fastmark 400 Series, User Manual, Page: 49 / 76

Share
Download
AMT Datasouth Fastmark 400 Series User Manual Download Page 49

User's Guide 48

Cleaning the Paper Compartment

It is recommended that the Paper Compartment be cleaned regularly if exposed to a dust
environment.  This will keep dirt and dust from contaminating or damaging your printer
(Printhead and Platen).

1.

 

Turn off the printer and open the top cover.

2.

 

Remove paper dust by blowing using compressed air or vacuuming.

3.

 

Clean the paper compartment with cotton, which has been moistened with mild
detergent.

Cleaning the paper sensor

It is recommended that the Paper Sensor be cleaned regularly if exposed to a dusty
environment.  This will prevent false paper OUT or paper IN conditions.

1.

 

Turn off the printer and open the top cover.

2.

 

Remove paper dust by blowing using compressed air or vacuuming.

3.

 

Clean the two Paper Sensor LED's with cotton stick, which has been moistened with
Isopropyl Alcohol.

Figure 19 - Paper Compartment and Paper Sensor

Paper Compartment

Paper Sensor

Summary of Contents for Fastmark 400 Series













































































Reviews:

No comments