manualshive.com logo in svg

AMT Datasouth Fastmark 400 Series, User Manual, Page: 4 / 76

Share
Download
AMT Datasouth Fastmark 400 Series User Manual Download Page 4

User's Guide 3

Table of Contents

PRODUCT DESCRIPTION ...................................................................................... 6
Unpacking and Inspection.......................................................................................... 8
INSTALLATION AND CONFIGURATION .......................................................... 9

Finding a Location for the Printer............................................................................ 9
Connecting the Power Cord ................................................................................... 10
Connecting the Printer to Your Host...................................................................... 11
Loading the Ribbon................................................................................................ 12
Loading Media ....................................................................................................... 15
Loading Media when Peel and Present Option is Installed ................................... 18
Loading Media When Cutter is Equipped.............................................................. 19

OPERATING INSTRUCTIONS............................................................................. 20

Switch, Indicators and Connections....................................................................... 20
Label Sensor Calibration Procedure ...................................................................... 21
Printer's Internal Self Test Procedure and Configuration Report .......................... 22
Resetting the Printer to Factory Default Settings .................................................. 25
Entering into HEX Print mode............................................................................... 25

COMMAND QUICK REFERENCE ...................................................................... 26

Command Set for the PPLA................................................................................... 26
Command Set for the PPLB................................................................................... 33

PRINTER DRIVER.................................................................................................. 36

Driver Installation .................................................................................................. 36
How to Use the Driver ........................................................................................... 38

TROUBLESHOOTING AND MAINTENANCE.................................................. 43

Troubleshooting ..................................................................................................... 43
Recovery ................................................................................................................ 45
Preventive Maintenance......................................................................................... 46

Appendix A: Printer Specifications......................................................................... 49

Fonts, Bar Codes and Graphics.............................................................................. 50
Optional Accessories.............................................................................................. 51

Appendix B: INTERFACE SPECIFICATIONS ................................................... 52

Introduction............................................................................................................ 52
Serial ...................................................................................................................... 52
Parallel (Centronics) .............................................................................................. 54
Auto Polling ........................................................................................................... 54

Appendix C: ASCII TABLE .................................................................................... 55
Appendix D:  FONTS AND BAR CODES FOR THE PPLA Emulation............. 56

Summary of Contents for Fastmark 400 Series













































































Reviews:

No comments