AMT Datasouth Fastmark 400 Series, User Manual, Page: 30 / 76

User's Guide 29
Formatting Commands
Command Description
: xxxx Set cut amount
A n Set print mode
n : ‘1’- exclusive, ‘2’ - transparent
C xxxx Set horizontal offset
c xx Set cut amount
D wh Set pixel width and height
E Form feed and return to system level command mode
G Store previous data to global register
<STX>S n Retrieve from global register. n : global register ID
H xx Set heating value, xx =01 to 20
M Toggle the mirror mode
m Set measurement in metric
n Set measurement in inches
P n Set print speed. n =’A’, ‘B’, or ‘C’
**
Q xxxx Set copy count
R xxxx Set vertical offset
r<n..n> Retrieve label data from printer buffer. <n..n> : label name
s m < n..n > Save label data to printer buffer. m : memory module,
<n..n> : label name
T xx Set end-of-line code, xx : hex value
z Change slash zero to normal zero (0).
+ xx
> xx
Make auto increment for numeric or alphanumeric,
xx : count
- xx
< xx
Make auto decrement for numeric or alphanumeric,
xx : count
^ xx Set count amount, xx : count
Notes: The formatting and editing commands should be grouped together, lead by <STX>L and
ended by E command.
**
: The parameter is ranged from ‘A’ to ‘C’ (1, 1.5 and 2 ips) for model FM403TT, while for
models FM402DT and FM402TT it is from ‘A’ to ‘D’ (1.5, 2, 2.5 and 3 ips).