AMT Datasouth documax 3300, User Manual

Page: 49 / 221

User’s Guide
Forms Handling 3-3
3.3 Load Forms
To access the tractors and load a continuous form into either tractor, proceed as follows: (For
cut sheet forms, go directly to Step 8.)
1. Unlock both tractors by rotating the locking levers.
2. Align the left tractor with the alignment mark located on the body of the printer. Lock
left tractor in place. Place the right tractor at the approximate forms width.
NOTE
To load the main tractor path on Dual Path
printer, place alternate path tractors in
center position. Main tractor doors cannot be
opened with alternate tractors aligned in
front. (Hint: Use least frequently changed
paper in main tractors and frequently
changed paper or narrow stock in the
alternate path.) If both paths are used, main
tractor path must be loaded first.
NOTE
If paper is to be loaded into alternate path,
align the left tractors with alignment mark on
printer for both feed paths before loading
front most forms.
NOTE
Form Thickness Adjustment Knob
automatically retracts printhead to allow for
forms loading and repositions to print
position after loading.