To view the working frequencies
Move the cursor to the first line with up or down button (as shown in Figure
3.7.3.1), and press OK button to enter the working frequencies display
interface (as shown in Figure 3.7.3.2). Press the return button back to the main
menu.
Figure 3.7.3.1
Figure 3.7.3.2
ATT Setting.
By default, the system is in Smart mode, so it will automatically adjust the ATT,
manual operation is not allowed; if you want to set ATT, please change it to
Manual mode by moving the cursor with up or down button to the forth line
“STATUS”, then press OK (as shown in Figure 3.7.6.1), then navigate the
cursor to “MODE” (as shown in Figure 3.7.6.2)
Figure 3.7.6.1
Figure 3.7.6.2
