Select DL OUTPUT (as shown in Figure 3.7.7.5), press OK to view DL
OUTPUT alarm (as shown in Figure 3.7.7.6).
Figure 3.7.7.5
Figure 3.7.7.6
To remove alarm, if it is in Smart mode, the device will make adjustment
automatically after re-powering; if it is in Manual mode, you should adjust the
outdoor antenna and the gain manually. If all is in OK status, that means it
works normally. Press the return button back to main menu after adjustment.
Restore Factory Settings
Move the cursor to the forth line
“
STATUS
”
with up or down button (as shown
in Figure 3.21), then press OK to enter, then navigate the cursor to
“
DEFAULTS
”
with up or down button (as shown in Figure 3.22), press OK to
restore to factory setting; factory settings by default is in Smart mode.
Figure3.7.8.1
Figure3.7.8.2
