Select a proper installation site according to the size and installation
requirements of the repeater.
Drill holes with percussion drill according to the position of the shell holes, pore
size is
Φ
7 and the hole location is as follows(unit: mm).
Mounting Hole Dimensions
Put the
Φ
8 expand plug into the 4 holes.
Align the fixing holes of the repeater with corresponding holes on the wall as
shown in Figure 4.2.1, and drive 4 M6*40 screws into the expand plugs with
screwdriver and fasten the repeater firmly.
Put the repeater upward onto the shell as shown in Figure 4.2.2.
Figure 4.2.2 repeater installation
