Chapter 4 Installation
4.1 Installation requirements
Before install or operate this repeater, please read the first chapter “safety
instructions” carefully. Please make sure the grounding wire is firmly grounded
and the power cord is firmly connected before power on the device.
Environment requirements.
It should be installed in a space where there is no corrosive gas and smoke or
liquid leakage.
It should be installed on wall that is waterproof, under thunder protection,
with sun block and good ventilation.
It should be installed at a height that is easy for cabling, with good heat
dissipation, safe and easy to maintain.
It should be installed in a place with stable and independent power supply.
Installation tools
No.
Items
Quantity
Remarks
1
Percussion drill
1
Drill holes on wall, self-provided
2
spanner
1
Reinforce
the
interface
connection,
self-provided
3
Expand plug,
screw
4
respectively
Fasten the device, delivered with the device
4
Mobile phone for
testing
1
Test the effect of the device, self-provided
5
Multimeter
1
Test
voltage
and
wiring
condition,
self-provided
6
screwdriver
1
Tighten or fasten the device, self-provided
7
Waterproof tape
some
Prevent water to leak into the feeder interface,
self-provided
4.2 Installation steps
This repeater should be installed on a hard, firm and flat surface, its installation
steps are as follows:
