Ampcontrol gasguard, Installation, Operation & Maintenance Manual

Page: 30 / 79

GASGUARD IS CONTROLLER Issue: R2, Date: 26/09/2011, CRN: 7502
Page 29
4.5.6 Set Output to Channel 3
1. To modify ‘CH3’ press the

key to enter
2. Use the

key toggle between IN and NOT IN
3. To save, use the

key
4. To escape, use the

key
4.5.7 Set Output to Channel 4
1. To modify ‘CH4’ press the

key to enter
2. Use the

key toggle between IN and NOT IN
3. To save, use the

key
4. To escape, use the

key
4.6 System Configuration Menu
1. Once in the Configuration Main Menu, scroll down using

key to position 18 System Configuration
2. Press

key to enter into sub-menu
4.6.1 Configuration Version
This level is read only and displays the ‘Configuration Version’ set at manufacturing
4.6.2 Modbus Address
1. To modify ‘Modbus Addr’ press the

key to enter
2. Use the

key to increment the address from 1 to 32
3. To save, use the

key
4. To escape, use the

key
4.6.3 Set Baud Rate
5. To modify ‘Baud Rate’ press the

key to enter
6. Use the

key to toggle between 2400, 4800, 9600, and 19.2k
7. To save, use the

key
8. To escape, use the

key
4.6.4 Set Parity
1. To modify ‘Parity’ press the

key to enter
2. Use the

key to toggle between ODD, EVEN, and NONE
3. To save, use the

key
4. To escape, use the

key
4.6.5 Set Start Up Delay
1. To modify ‘S DLY (sec)’ press the

key to enter
2. Use the

key to scroll through the numbers
3. Use the

key to move cursor across to the next digit
4. To save, use the

key
5. To escape, use the

key