Ampcontrol Pty Ltd
– ABN 28 000 915 542
GG2 DISPLAY USER MANUAL
GG2B023 Version 3
– JUNE/19
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 49 of 82
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
6.3 Connecting and Disconnecting a GG2 Detector
Connecting a GG2 Detector
The following steps detail connecting a detector to the display. Refer to Section 4.4.3 for more
information.
1. Ensure that the device is Isolated or in sleep mode, refer to Section 6.2.4 and Section 6.2.5.
2. Attach the new detector to the display or extension cable and secure the clip retainer by pushing
it fully rearwards, the pull ring should be in-line with the detector housing.
3. Take the device out of sleep mode by pressing any of the magnetic segments.
4. The display will attempt to communicate with the new detector (refer to Figure 53).
NOTE
The “Establishing Detector Comms” screen may only appear for a brief
period.
5. At this stage the display will either;
a. Show the detector warmup screen, please see 6.2.2, or
b. Show the different gas sensor warning, please see 6.3.1.1
6.3.1.1 Connection of the First Detector
Figure 57: Connecting a Detector for the first time
A special warning screen is displayed when the first detector is connected to the system, refer to Figure
57. After acknowledging this screen by pressing the centre magnetic button, the display will either:
Begin the detector image update process, please see Section 6.3.1.4, or
Show the detector warmup screen, please see Section 6.2.2.
