Operat ion and Maintenance Manual
QTS Series Twin Screw Positive Displacement Pump
8.
RETURNS. No Products or parts may be returned by Purchaser without the prior writ-
ten consent of Seller.
9.
WARRANTY. Seller warrants that the Products manufactured by Seller will be free from
defects, material and workmanship under normal use and service for a period of one (1) year
from date of shipment. In addition, the specified rating of each pump is warranted; however,
the characteristic shape of the performance curves may vary from the published standards,
and the capacity, head and efficiency guarantees are based on actual shop tests using clear
cold water, and therefore the rating is specified in equivalent units of clear cold water. The
sole obligation of Seller and the exclusive remedy of Purchaser for breach of this warranty shall
be the repair (at Seller’s facility) or replacement by Seller (F.O.B. Milwaukee, Wisconsin), at
Seller’s option, of any parts found to be defective, without charge and shall be conditioned
upon Seller receiving written notice of any alleged breach of this warranty within a reasonable
time after discovery of the defects, but in no event later than the end of the warranty period.
The parts alleged to be defective shall be returned to Seller upon its request, freight prepaid.
This warranty does not cover ordinary wear and tear, abuse, misuse, overloading, alteration or
Products or parts which have not been installed, operated or maintained in accordance with
Seller’s written instructions. Seller shall not be liable for any expenses for repairs, additions or
modifications to the Products outside of Seller’s factory without its prior written consent, and
any such repairs without such consent shall void this warranty. THIS WARRANTY IS EXCLU-
SIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Seller may from time to time provide its facilities,
personnel and experience to assist customers in the selection of materials, design, installation
and operation of Products for maximum resistance to corrosion and abrasion with due
consideration to the economy of the installation. This service is provided in an advisory
capacity only and the final selection and operation of the Products and ancillary equipment
shall be the sole responsibility of Purchaser or any user thereof. Accessories and parts
manufactured by third parties are warranted only to the extent of such third party’s warranty. IN
NO EVENT SHALL SELLER BE LIABLE UNDER ANY CIRCUMSTANCES FOR ANY
INCIDENTAL, CONSE- QUENTIAL OR SPECIAL DAMAGES (INCLUDING, WITHOUT
LIMITATION, ANY LOST PROFITS OR LABOR COSTS) ARISING FROM THE BREACH OF
THIS WARRANTY OR OTHERWISE ARISING FROM OR RELATING TO THE PRODUCTS OR
10.
CHANGES. Changes in any work to be performed hereunder may be made only
upon Purchaser’s written instructions and acceptance by Seller in its discretion. Any change
in drawings, materials or design of the Products, or to tools, fixtures or other items used to
produce the Products, which affects Seller’s cost to produce the Products will entitle Seller to
adjust the price to take into account any additional costs. If work has been started, Seller shall
be properly reimbursed for work already performed; if Products already produced are not
accepted by Purchaser, Seller has the right to adjust the price to take into account any
additional costs caused by an increase or decrease in quantities or in the time required for
performance under the agreement.
42
Ampco Pumps Company QTS Manual M-030 Rev A 1.16
