MAN3090-1 Page
9
of
38
Assigning RCCs
The newly added RCCs should now be assigned.
From Unassigned Dev
Assign Device
Assign RCCs
Dev 000 of 001
changing to
Done 001 of 001
(once complete).
BACK
To Exit
Device Installation & Programming
Wireless devices can be programmed to their relevant RCC prior to their installation. The devices must
be powered up and then added to their relevant RCCs, by pressing their log on buttons. For more
information about these devices see the Device Power, Logon & Ident Orientations section.
From Front Display
Add New Device
Select Desired
RCC 01
Set Loop 1
Addr 003
Add By Log On
Press Dev Log On
‘
press the devices log on button, followed by
Add Dev 03456 Y?
New Addr L1 A003.
BACK
To Exit
The device has now been added to the Radio Hub and should be installed in its location, prior to the next
step of assigning the device to its relevant RCC. See the relevant devices installation instructions, for more
information.
Assigning Devices
The newly added devices must now be assigned. This can be achieved by selecting;
From Unassigned Dev
Assign Device Assign All Dev 000 of 003
changing to
Done 003 of 003
(once complete)
BACK
To Exit
