MAN3090-1 Page
11
of
38
Internal Indications
RF1 RX LED
;
a green LED will flash when data is received from a Radio Cluster Communicator, using
receiver 1.
RF2 RX LED;
a green LED will flash when data is received from a Radio Cluster Communicator, using
receiver 2.
RF1 TX LED;
a yellow LED will flash when data is transmitted to a Radio Cluster Communicator, using
receiver 1.
RF2 TX LED;
a yellow LED will flash when data is transmitted to a Radio Cluster Communicator, using
receiver 2.
LP 1 LED;
a yellow LED will illuminate constantly whilst there is an active, healthy connection on loop 1.
The LED will also flash when data is being passed on the loop.
LP 2 LED;
a yellow LED will illuminate constantly whilst there is an active, healthy connection on loop 2.
The LED will also flash when data is being passed on the loop.
LP 3 LED;
a yellow LED will illuminate constantly whilst there is an active, healthy connection on loop 3.
The LED will also flash when data is being passed on the loop.
LP 4 LED;
a yellow LED will illuminate constantly whilst there is an active, healthy connection on loop 4.
The LED will also flash when data is being passed on the loop.
LCD Display;
the Radio Hub incorporates a 16 character LCD display, used for displaying the number of
devices on the system, along with current alarm and fault totals. This is also used for programming
functions.
Rotary Control;
a Rotary Control is used to scroll through and enter menu options for programming
purposes.
Reset Button;
the reset button is used to reset the Radio Hub.
Back Button;
the back button is used to move back a step in the menu.
Log On Button;
the log on button is not used on the Radio Hub and is for future use.
ENG 1 Port;
the engineers port is used to establish connection to a computer based terminal program.
This is used for programming purposes, using the Configuration Tool.
Loop 1 -4 Connections;
these are used for Loop IN and OUT connections to the fire alarm control panel.
The loop connections are used for passing device data to the control panel. Note; Loop 1 connections are
used to apply power to the Radio Hub.
