MAN3090-1 Page
23
of
38
Hub/RCC Options
This menu allows access to the configuration of the Radio Hub and Radio Cluster Communicators.
Front Display
Hub/RCC Options
Set Hub Address;
this section allows the Radio Hub to be allocated to a particular loop and Loop Address
number. As default the Radio Hub will be set as device address 001 on loop 1.
Front Display
Hub/RCC Options Set Hub Address
Add RCC;
this section allows a Radio Cluster Communicator (RCC) to be added to the system. The
function allows the unit to be added using either the log on button situated on the unit or via the devices
unique identification number. The associated Loop number i.e. 1-4, Loop address number for the RCC
and its signal path are all programmed within this menu.
Front Display
Hub/RCC Options Add RCC
Remove RCC;
this section allows an RCC to be removed from the system. A list of RCCs already allocated to
the system are shown, these can be scrolled through by turning the rotary control. When the RCC
requiring removal is shown on the display, the rotary control can be pushed to select this device. Once
the rotary control has been rotated to display
‘
Remove Device Yes
’
, pressing the rotary control will
remove the RCC from the system.
NOTE: RCCs can only be removed from the system when no devices are allocated to that particular RCC.
Front Display
Hub/RCC Options Remove RCC
