Ampac 4110-2004 Programming Manual Download Page 20

Page: 20 / 38

MAN3090-1 Page

Battery Level;

this menu when entered shows information on the selected device

’

s battery status. The

status of the pack is updated whenever there is a status change or automatically updated every 6 hours.
This is broken down into five sections.

ront Display

Device Status

Select Desired Device No

Battery Level

Each device will show the status of its two battery packs. The battery status information is displayed as

follows;

Pack 1 OK;

this indicates a good battery voltage is present in Pack 1. This is represented by displaying a

full battery icon.

Pack 1 Warning;

this indicates the battery voltage is low in Pack 1 and is a 30 day warning indication. The

batteries must be changed on the device within 30 days for continued reliable operation. This is
represented by displaying a half full battery icon.

Pack 1 Low;

this indicates the battery voltage is low in Pack 1 and is a 7 day warning indication. The

batteries must be changed on the device within 7 days, for continued reliable operation. This is
represented by displaying an empty battery icon.

Pack 1 Missing;

this indicates a battery from Pack 1 is missing. The battery must be inserted on the

device for continued reliable operation. This is represented by displaying an

symbol.

Pack 2 OK;

this indicates a good battery voltage is present in Pack 2. This is represented by displaying a

full battery icon.

Pack 2 Warning;

this indicates the battery voltage is low in Pack 2 and is a 30 day warning indication. The

batteries must be changed on the device within 30 days, for continued reliable operation. This is
represented by displaying a half full battery icon.

Pack 2 Low;

this indicates the battery voltage is low in Pack 2 and is a 7 day warning indication. The

batteries must be changed on the device within 7 days for continued reliable operation. This is
represented by displaying an empty battery icon.

Pack 2 Missing;

this indicates a battery from Pack 2 is missing. The battery must be inserted on the

device for continued reliable operation. This is represented by displaying an

symbol.

Summary of Contents for 4110-2004







































Search results

Summary of Contents for 4110-2004

Reviews:

Related manuals for 4110-2004

Brands by name

Popular brands

Ampac 4110-2004, Programming Manual

Search results

Summary of Contents for 4110-2004

Reviews:

Related manuals for 4110-2004

Brands by name

Popular brands