4
Front Panel
Figure 3-Front Panel
»»
LCD display
- Display menu and current information.
»»
Menu operation buttons
- Menu operation keypad with "Return key" ,Knob "confirm and adjust." The
following are included on each key.
OK& ESC
key, or return to the previous menu.
Knob , press the OK button to enter the menu or submenu key to confirm the function. Rotate
"plus" - "minus" operation, you can adjust the menu position or adjust the parameter value becomes
small.
»»
Input Selection
- INPUT button in the region, including all of the input 8-channel switch button, the
test pattern, screen freeze, black screen, VGA automatic correction function buttons. button Indicators of
the button state in the region there are three kinds, namely:
»»
The button lamp flashes slowly:
Flashing interval of about one second, and has been in flashing,
indicating that the channel table when no signal switching.
»»
Button light flashes quickly:
When you press the button, the button indicating rapid flashing time is
about 0.3 seconds, indicates that the device is currently being tested and decodes the input video.
»»
button indicator light:
Indicates the current channel signals are connected properly or the current
function is active. Here is the Enter button on regional detailed description of the function buttons
Figure 4- Inputs
●
AV1, AV2
switching button.
●
VGA1, VGA2
button, VGA input switching buttons and automatic correction button (AUTO function).
When the input channel for VGA1 or VGA2, repeatedly pressing VGA1 or VGA2 button VGA video
processor corrects the current channel, so that the screen output is normal. VGA channel AUTO function:
When the input channel for VGA1, and VGA1 have screen output, press VGA1 (AUTO) button, you can
recalibrate the current VGA1 signal. VGA2 button also has the same functionality and operation.
●
DVI1, HDMI
bond, respectively, after the corresponding panel DVI1,HDMI video inputs.
