3
Panel
Rear Panel
Figure 1-Video processor rear panel
»»
AC Power Input
- using IEC standard power cable video processor, the input power is 100-240 VAC,
50-60Hz.
»»
Video Input
- processor can receive digital video signals, the analog video signal, a CVBS video
signal, the following criteria for each input interface.
● AV1, AV2 input, BNC connector, input video support PAL, PAL-M / N, NTSC, SECAM formats. You can
connect DVD players and camcorders.
● DVI input, DVI-I standard interface, use the DVI-I or DVI-D cable, the video input format supports VESA
standard.
● HDMI HD video input, HDMI-A standard interface, support HDMI1.3 standard video inputs and VESA
standards. Used to connect desktop computers and HDMI high-definition player.
● VGA1, VGA2 video input, using the standard DB-25 connector, supports the VESA standard video
input for connecting a desktop computer, laptop or other VGA video output device.
»»
Video Output
- video output interface processor programming
● VGA output, using the standard DB-25 connector. DVI output interface with the output video format as
used to connect to a monitor.
● DVI output, using the DVI-I connector, the output video format is set by the processor, two DVI outputs
the same signal at the same time. Used to send the card or connected to the LED monitor.
»»
RS-232
- Serial communication connector for engineering testing, the device is programmed, PC
software control, communication baud rate is 115200bps.
»»
LED sending card
- LED sending card installation location aside, you can install one or two to send
cards. When installed, the user can first open the back cover and the small bracket, mounting, internal
set aside four 5V power connector, four 2.0x4PIN connectors. After installing the plug 5V power supply.
Figure 2-LED sending card
