![background image](http://html1.mh-extra.com/html/amica/10203-3tzdpssclbjvsm/10203-3tzdpssclbjvsm_instruction-manual_2932704018.webp)
OPERATION
18
Operation.
In this mode you can select the desired
functions, programmes and adjust settings.
You can use ,
, and sensors that
activate the Child Lock. Other touch sensors
are enabled when necessary.
W h e n
all programmes complete and you do noth-
ing for 60 seconds, the appliance turns off
(auto-off).
When you use the appliance display back-
light brightness is normal. Oven chamber
outline symbol is displayed in oven function
area. The display shows the current oven
temperature or "--- °C" when the tempera-
ture is lower than 30°C. If meat probe is
unplugged, no information relating to meat
probe is displayed. Otherwise, the sym-
bol is displayed and meatprobe temperature
is shown of "-- °C" when the temperature is
below 30°C. The text display (left) shows the
message "Select function >" and ">" is blink-
ing.
Clock
Touch and hold for a few seconds to
change the current time. In turn you can
set time display mode (12h/24h), hours and
minutes.
- touch or
to adjust settings;
- touch OK to confirm the setting and begin
to adjust the next setting;
- touch to go back;
- when selecting time display mode
(12h/24h), touch or or do nothing for 10
seconds to abort.
Touch OK to confirm and store the settings.
In 12h mode the "AM" is displayed for 1-12
hours and "PM" for 13-24 hours.
You can only set the time when the appli-
ance is in standby or operating mode an no
automatic programme or timer is enabled.
Otherwise, when you touch and hold the
sensor, you will hear an [error] beep and you
will not be able to change the current time.
Summary of Contents for 10203.3TzDpsScLbJVSm
Page 40: ......