Amica 10203.3TzDpsScLbJVSm, Instruction Manual

Page: 13 / 40

13
OPERATION
Before using the appliance for
the first time
Important!
To clean the oven chamber use only
warm water and a small amount of
washing-up liquid.

Remove packaging, clean the interior of
the oven,

Take out and wash the oven accessories
with warm water and a little washing-up
liquid,

Turn on the ventilation in the room or
open a window,

Heat up the oven (to a temperature of
250°C for approximately 30 minutes),
remove any stains and wipe the interior
carefully. (See section: Using the control
panel ),
Important!
The oven features touch control panel
and display. To activate each touch
sensor, touch the glass above the
sensor (indicated by a pictogram). An
acoustic signal will be heard.
On/off switch is on the right side
of the display. To activate each touch
sensor, touch the glass above the
sensor (indicated by a pictogram). An
acoustic signal will be heard, which
was selected in the menu. (See sec-
tion: Using the control panel ),
Touch sensor surfaces must be
kept clean.
Some models are equipped with
a backlit oven door handle. For
additional information on oven ac-
cessories depending on the model,
please see section Features and
components .
Oven handle backlight is turned on
during operation and acts as oven
cavity residual heat indicator, i.e. it
turns off when the temperature inside
the oven cavity drops below 50°C.
The backlight is on above 50°C and
light intensity reflects the temperature,
i.e. the higher the temperature inside
the oven cavity the higher the back-
light intensity.