27
OPERATION
Cleaning programme.
Cleaning programme can be found in the
"Heating functions", but it operates much
like pre-set programmes. You can select the
following heating programme:
- Pyrolytic cleaning (depending on the mod-
el)
- Cleaning
Cleaning.
Pre-set cleaning programme: temperature
90°C, top bottom heater, duration =
30 minutes with no fast heat-up. The clean-
ing symbol is shown.
The message "Add 50cl water and touch OK
to start" is displayed.
Aqualytic enamel oven (marked by the let
-
ters
Qa
).
Pour 50 cl (two glasses) of water on the bot-
tom of the oven chamber.
Standard enamel oven (marked by the let-
ter
Q
).
Insert the bread baking tray on the lowest lev-
el and pour 25 cl (one glass) of water into it.
"Cleaning" is shown on the display.
You can modify the pre-set cleaning pro-
gramme settings.
Pyrolytic cleaning*
The Pyrolytic cleaning programme comes
with special requirements. The message
"Remove all items from the oven and touch
OK”.
You need to confirm the setting within 10
minutes.
When you confirm the message is dis
-
played: "Select pyrolytic cleaning duration"
and the choices are: 90 minutes, 120 min-
utes and 150 minutes Use controls to make
your choice.
When you confirm door status is checked. If
the door is open the message "Close oven
door and touch OK to start" is displayed. If
the door is closed the message is displayed:
"Touch OK to start pyrolytic cleaning" You
have 10 minutes to close the door and touch
OK to confirm.
Pyrolytic cleaning starts. The door is locked.
The symbols and are shown. Top grill
heater and bottom heater operate with tem-
perature setting of 480°C and cooling fan
operates at speed 2. The temperature is set
to 465°C and bottom heater operate inter-
mittently. The message "Caution! Pyrolytic
cleaning!"
30 minutes ahead of End Time all heaters
are turned off, temperature changes to "---
°C" and the message changes to "Cooling
down."
Based on the cooling rate the appliance cal-
culates and displays the time remaining until
the end of the pyrolytic cleaning.
The door is unlocked when temperature is
less than 150°C.
The cooling fan slows down to speed 1.
No settings can be changed during the py-
rolytic cleaning and you cannot continue
cooking with these settings. When you si-
lence the alarm, the appliance always en-
ters operating mode. Touch to terminate
the pyrolytic cleaning.
If there is a short power outage during py-
rolytic cleaning the appliance starts cooling
down and eventually unlocks the door.
When you touch to abort pyrolytic clean-
ing the appliance starts cooling down and
eventually unlocks the door. When the door
is unlocked the appliance switches to stand-
by.
When you touch OK to start pyrolytic clean-
ing and open the door before it is locked
there will be an [open door] beep and pyro-
lytic cleaning is aborted.
*optional
Summary of Contents for 10203.3TzDpsScLbJVSm
Page 40: ......
