28
OPERATION
Settings
Touch and together to enter setup
menu. The appliance must be in operating
mode to enter setup.
Menu navigation:
, – go to another menu item; menu
items are rotated in a loop;
OK – confirm;
– open pre-set programmes menu (clear
unconfirmed settings);
– open heating functions menu (clear un-
confirmed settings);
– open timer menu (clear unconfirmed
settings);
– go back. If you are on the main screen
– clear settings and enter operating mode.
[do nothing for 20s] - if you do nothing for 20
seconds, settings are cleared and the appli-
ance enters operating mode.
"Setup" is displayed on the left and available
options on the right.
- 1. Language
- 2. Light
- 3. ECO;
- 4. Display brightness
- 5. Handle backlight brightness (option)
- 6. Service
- 7. Factory settings.
1.Language.
"Select language" is displayed on the left.
Available language selection options are
displayed on the right. Current language is
the default option.
Touch , to change the language. Touch
[OK] to select your preferred option. The
"Select language" message and "Touch OK
to confirm" will be displayed in your pre
-
ferred language.
Touch or to go back to language se-
lection. Touch to go back to the current
default language. Touch OK to store the
default language and go back to the setup
menu
2. Light
"Select light mode" is displayed on the left.
Available options are displayed on the right:
Continuous and ECO. The default is the cur-
rent setting and the factory setting is: ECO.
Touch OK to store the current setting and go
back to the configuration menu.
Appliance specification assumes ECO set
-
ting is used. In continuous setting light is
turned on:
- when the door is open;
- during heating function
3. ECO
"Select oven operation mode" is displayed
on the left. Available options are displayed
on the right: Normal operation and ECO.
The default is the current setting and the
factory setting is: ECO. Touch OK to store
the current setting and go back to the con-
figuration menu.
Appliance specification assumes normal
setting is used. ECO mode affects the op-
eration of pre-set programmes when dura-
tion or meat probe are used.
If Duration exceeds 25 minutes, the heaters
and fan are turned off 5 five minutes before
End Time and audible alert.
If meat probe is used, heaters are turned off
at 2°C below the set temperature. If the tem-
perature does not rise within 2 minutes, the
target temperature is raised by 1°C (-1°C of
the set temperature). If the target tempera-
ture is not reached with the next three min-
utes, it is raised 1°C and programme ends
(the appliance assume the set temperature
has been reached).
4. Display brightness.
"Select display mode" is displayed on the
left. Available options are displayed on the
right: Operation, Standby, Night. When you
Summary of Contents for 10203.3TzDpsScLbJVSm
Page 40: ......