Amica 10203.3TzDpsScLbJVSm, Instruction Manual

Page: 23 / 40

OPERATION
23
ration). The symbol indicator flashes and
"0:00" is shown (or, if the function has been
previously activated, the remaining duration
until the oven turns off). Touch or to
adjust settings. Touch or do nothing for 5s
to abort and keep previous settings or touch
to confirm Duration and start countdown.
The symbol is shown. The symbol
and End Time flash for 5 seconds, then the
symbol goes out and the display shows
current time.
You can independently set the timer and
heating functions. You can also change the
heating functions while timer is counting
down. The Timer continues to count down
regardless of whether any of the heating
function is activated. The fast heat-up func-
tion does not affect the timer either.
You can deactivate the timer by setting the
duration to 0:00.
Once duration has elapsed, you will hear an
[end] beep. All heating elements are discon-
nected. You can silence the alarm as fol-
lows:
- touch any sensor once to reset all function
settings, temperatures and to turn on light
for 30 seconds;
- touch twice to set the new duration and
continue cooking with currently set tempera-
ture and settings.
Automatic operation
You can set the appliance, so that its timed
operation is delayed and cooking ends at a
specific time.
You must first set the Duration (same as in
timed operation). Touch to confirm the
set Duration. The symbol lights up and
the symbol starts flashing. The display
will show the End Time (calculated as Start
Time + Duration). Touch within 5 seconds
to move the End Time forward (and delay
Start Time). Touch or to adjust. Touch
, or do nothing for 5 seconds to abort or
touch OK to confirm. Once End Time is con -
firmed the and symbols light up stead-
ily and the Current Time is shown again.
The and indicators are on during the
countdown to Start Time. Once the count-
down is complete, the symbol goes off
and the appliance turns on heating for the
set Duration.
Touch to view and modify the set dura-
tion.Touch the sensor once to set the Kitch-
en Timer, touch it again to set Duration and
touch it the third time to set the End Time
Set Duration to 0:00 to erase both Duration
and End Time.
You can adjust End Time from (Current Time
+ Du 1 minute) to (Current Time +
Du 10 hours). You can modify Du-
ration (when End Time is set) from 0:00 to
(Duration – Current Time – 1 minute).
Duration countdown
The appliance counts down duration. Cur-
rent Duration is shown on the bottom line
and accompanied by the [duration symbol
]. The duration is cleared when the appli-
ance is in standby.
During timed operation (pre-set pro-
grammes or timer) the time remaining to
the next stage is shown (no symbol) i.e.
the time remaining to Start Time and to End
Time. Touch and hold for 3 seconds to
view elapsed time. Touch and hold for 3 sec-
onds again to view remaining time.