Amibot PURE LASER, User Manual

Page: 34 / 220

32
Troubleshooting
EN
No. Problem Cause Solution
01
The appliance
does not switch
on.
1. The appliance is not
switched on.
2. The appliance has
run out of battery.
1. Switch the robot on.
2. Charge the robot using
its home base.
02
The robot does
not charge any
more.
1. The robot is not
correctly positioned
on the home base or
it is not plugged in
correctly.
2. The robot is not
switched on.
1. Correctly reposition
the robot and place its
power sensors on the
home base sensors.
2. Switch the robot on.
03
The robot
does not move
correctly
1. The floor is wet.
2. The dustbin is not
attached correctly.
3. The central brush
is not inserted
correctly.
1. Dry the floor.
2. Remove and reinsert
the dustbin.
3. Remove and reinsert
the brush in its cavity.
04
Appliance
suction lost
1. The dustbin is full
2. The central brush or
the side brushes are
blocked.
1. Empty the dustbin,
clean the motor and
the filters.
2. Remove any hair
and debris from
the brushes. Check
that there is no dirt
obstructing the robot.