Amibot PURE LASER, User Manual

Page: 20 / 220

18
Operating the robot
EN
Cleaning modes
The robot has five cleaning modes. These cleaning modes can be
selected via the remote control or the AMIBOT HOME mobile app.
AUTO and AREA TO CLEAN mode can also be selected via the robot.
AUTO mode
Press the power button on the robot
or the AUTO button on the remote
control. The robot uses its laser to scan
the room to optimise its movements. It
divides the room into areas in a zig-zag
fashion to vacuum any debris and dust.
During an AUTO mode cleaning cycle, the robot may take a short
break, so it can scan the room in real time and adapt its movements.
MAX mode
The MAX mode is useful for floors
that are extremely dusty. The
robot has three vacuum levels.
Press the MAX button on the
remote control to increase or
decrease the robot's vacuum level.
NOTE: MAX mode is only accessible when the robot is in vacuum mode. It cannot be
selected while the water tank is inserted. However, you can regulate the water flow
intensity via the remote control.