Amibot PURE LASER, User Manual

Page: 23 / 220

21
Maintenance
EN
Unclip the side brushes by gently
pulling them upwards and rinse them
under clean water. Wait until they are
completely dry before reusing them.
Check that the left brush is marked with
an "L" and the right brush is marked with an "R". The engraved
letters on the side brushes and the robot are there to guide you.
NOTE: Side brushes must be replaced if you notice that their original shape has
changed.
Side brushes
Side wheels and castor
Wipe the side wheels with a dry cloth to remove built up dust.
Pull firmly on the castor block to remove it. Then remove all the debris
from inside the cavity using a soft cloth. Use a slotted screwdriver to
remove the castor from its frame and wipe it clean. Remove the hair
and other debris caught around the axle.