Amibot PURE LASER, User Manual

Page: 31 / 220

29
Troubleshooting
EN
05
“Please scrub the
front sensor, and
restart me from a
new location”
The bumper’s sensors
are dirty. Clean the bumper’s sensors
using a soft cloth.
06
“Please scrub
the right-hand
sensor, and restart
me from a new
location”
The wall sensor is dirty.
Clean the wall sensor using
a soft cloth and place the
robot somewhere else.
07
“Please scrub the
radar housing on
top, and restart
me from a new
location”
The laser module is
dirty.
Check the laser and clean
it thoroughly. Be sure to
remove any dust that could
prevent it from working,
using a soft cloth.
08
“Bumper may be
stucked, please
check” Problem with the
bumper. The bumper
is frozen. Check the bumper and
place the robot somewhere
else.
09
“Please clean the
dustbin and filters” The dustbin is full or
the filters are dirty.
Empty the dustbin and
clean the filters (see the
Maintenance section).
10
“I’m stuck, please
help me!” / “Please
place me correctly!”
The robot has got
stuck. Move the robot to a clear,
flat area.
11
“Please check if
my wheels have
become blocked
somewhere”
Problem with the
wheels and/or the
castor.
Check the wheels and
the castor and remove
any elements likely to be
blocking them.
EN