15
Floor cover
L, Assemble floor cover
(See Fig. 22).
M.
Install lifting arms and adjust the arm locks
After installing the lifting arms
(See Fig.23)
. Lowing the carriages down to the lowest
position, then use the
8#
wrench to loosen the nut of the fixed gear (
see Fig.24
), Adjust
the gear according to the arrow direction
(see Fig.25)
, tighten the screws until the
gear and rack match in good condition
(see Fig.26)
.
Fig.22
Use the
8
#
socket wrench to
loosen the nut of Moon gear
Fig. 23
Snap Ring
Fig. 24
Use wrench to
loosen the nut
Summary of Contents for BP-10
