10
H. Connecting the cables
1
．
Connect the cables follow step
a
to
f.
(See Fig. 17).
Fig.17
a.
Cable pass through
the carriage
b.
Push the carriages higher than
chain pulley, cable pass
through the top end of the
carriages and pass through
the hole of the bottom steel
plate of the carriages
c.
Pass through the
cable from the small
pulley
d.
Cable pass through
the small pulley in
another column
e.
Pull out the cable from
bottom to top and hang
the cable on big pulley
f.
The fitting of cable pass
through the hole of the
bottom steel plate of
the carriages and screw
the nuts.
Summary of Contents for BP-10
