10
2. Install tire stop plate with bolts and washer on the platform: Tighten the
platform on cross beam B with bolts, tighten the tire stop plate on cross beam A with
bolts
Note: The bolts for the side with tire stop plate is longer, pay attention when
choosing the bolts
(See Fig.17)
Instruction: 1). This lift is designed in both side (cross beam A and cross beam B) car
in direction, user can install the lift according to the location. Below is the installation for
the side of cross beam B car in direction. If choosing the side of cross beam A car in
direction, then install the tire stop plate to the other side.
2). Powerside column can be installed at any position on customers’ requirement, but
the power unit must be installed near the side with the safety lock release handle.
Fig. 17
car in direction
5
Cross beam B
Cross beam A
Interchange the installed
position according to
demand
24
26
25
Tighten the platform
with bolts
M16*30
27
28
Tighten the bolts
M16*35
with washer
Summary of Contents for 408-P
