25
N. Install lifting arms and adjust the arm locks
.
Install the lifting arms
(See Fig. 36)
,
lowing the carriages down to the lowest position,
then use the
8
#
socket head wrench to loosen the socket bolt
(See Fig. 37)
.
Adjust the arm lock as direction of arrow
(See Fig. 38)
.
Adjust moon gear and arm lock
to make it to be meshed, then tighten the socket bolts of arm lock
(See Fig. 39)
.
Loosen the Bolt
Fig. 36
Use the 8
#
Socket Head Wrench
to loosen the Socket Bolt
Fig. 37
Moon Gear
Locking the bolts after the moon
gear and arm lock engaged well
Locking the bolt
Fig. 38
Fig. 39
Snap Ring
Summary of Contents for OHX-10
