AMG AMG-I30B Series, User Manual

Page: 12 / 54

8
Ethernet communication method, will allow you connect device to your
local network or WAN.
1. Press Menu key > Setup > Communication
specified Device ID . (ranged from 1 - 255).
Generally you want to start with value "1" for the first device and
"2" for the second one.
2. Press " " or " " key to set the port number, default value is 5005,
please keep default value.
3. Press " " or " " key to set the IP Address, Default gateway and
Subnet mask. Save changes.
please refer to your network administrator for co
IP Address, Default Gateway and subnet mask configuration.
4. Use " " or " " key to set Ethernet to "Yes" and RS
communication to "No".
5. Insert LAN cables into the RJ-45 port on the
RS-232 Communication Mode (Serial cable)
mmunication method, will allow you connect device to your
Communication > Press OK .
255).
Generally you want to start with value "1" for the first device and
" key to set the port number, default value is 5005,
" key to set the IP Address, Default gateway and
please refer to your network administrator for configure the proper
Default Gateway and subnet mask configuration.
" key to set Ethernet to "Yes" and RS-485
45 port on the device.
(Serial cable)