Battery Replacement
To open the remote, you must remove the key ring and use a small screwdriver or flat object to
open the housing at the bottom corner. Now you can remove and replace the
CR2032 3V
battery. When you have done everything you can reassemble both housing halves.
Paring
The remote control is paired in by pressing the upper and lower buttons simultaneously
for 3 seconds. After that, the LED flashes red and blue for a short time and then flashes
blue permanently. It is now in learning mode. Now you can teach in under
Settings
Sensors
+ New sensor
Sensors for arming,
the sensor
hand remote control.
The sensor is in teach-in mode for about 45 seconds.
