Installation Insturctions For Door/Window-Combined-Detector
Please keep in mind that you need to reach the bottom of the transmitter to change
the battery. Please install the transmitter so that you get with a screwdriver on the
lower side.
General Information:
When mounting the ST transmitters, make sure that they are
not
mounted on a metal surface
. (e.g., aluminum windows or steel doors)
If these instructions are ignored, the radio range or functions may be considerably
restricted. If you would like to monitor a metal window, door or garage door, please use
the offered metal surface sensors.
Step 1: Clean the surface
Thoroughly clean the surface of the window frame
with a cloth and a detergent. (for example, glass
cleaner)
The surface should be free of grease before fitting
the door / window sensor
