Revised 09/2005
E-mail: [email protected]; [email protected] ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts) ; Fax: +420 582 360 606
1- 3 6
84-55
CONTROLS & PROGRAM DESCRIPTION
Screen 4.1.b.5 shows Presser Foot/Jig Drive solenoid valve. Press the key
F6
,
Y04 – Offf
will start
flashing, then pressing key
F4
once, will change the output status from
Y04 – Offf
to
Y04 – On
and
then pressing key
F6
will energize pneumatic solenoid for Presser Foot/Jig driver pneumatic cylin-
der (Pressing the key
F4
again while the display is flashing will toggle the
On/Off
status) and the
display will stop flashing. Pressing
F1
will enter into the next Screen 4.1.b.6 & pressing
F2
will
enter into the previous Screen 4.1.b.4.
Spare/Jig Turn
Y05 - On
Screen 4.1.b.6
Screen 4.1.b.6 shows Jig Turn solenoid valve. Press the key
F6
,
Y05 – Offf
will start flashing, then
pressing key
F4
once, will change the output status from
Y05 – Offf
to
Y05 – On
and then pressing
key
F6
will energize pneumatic solenoid for jig turn operation (Pressing the key
F4
again while
the display is flashing will toggle the
On/Off
status) and the display will stop flashing. Pressing key
F1
will enter into the next Screen 4.1.b.7 and pressing key
F2
will enter into the previous screen
4.1.b.5. This feature is not used in all the machines and some machines may not be equipped with
this feature and this parameter may not be displayed.
Jig Eject S/V
Y06 - Off
Screen 4.1.b.7
Screen 4.1.b.7 shows Jig Eject solenoid valve. Press the key
F6
,
Y06 – Offf
will start flashing, then
pressing key
F4
once, will change the output status from
Y06 – Offf
to
Y06 – On
and then pressing
key
F6
will energize pneumatic solenoid for jig eject operation (Pressing the key
F4
again while
the display is flashing will toggle the
On/Off
status) and the display will stop flashing. Pressing key
F1
will enter into the next Screen 4.1.b.8 and pressing key
F2
will enter into the previous screen
4.1.b.6.