AMF 84-55 MJ, Parts And Service Manual, Page: 36 / 91

Revised 09 /2005
E-mail: service@amfreece.cz; parts@amfreece.cz ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts) ; Fax: +420 582 360 606
1- 3 1
84-55
CONTROLS & PROGRAM DESCRIPTION
5.2.1 INPUT TESTING MODE:
Pressing the key
F3
will enter into the input testing mode and first screen of input testing mode i.e.
Screen 4.1.a.1 will appear. Pressing key
F2
will take back to the previous Screen 4.
F1 F2 F3 F4 F5 F6
NEXT PREV
CLR ENT
Needle Up Proxy
X00 – On
Screen 4.1a.1
In this mode if the proximity switch for needle up sensing is energized, the display will show
X00 – On , otherwise it will display X00 – Off .
Pressing
F1
will enter into the next Screen 4.1.a.2 and pressing key
F2
Motor Run – Yes/No
Screen 4.1.a.2
In this mode if the proximity switch for needle down sensing is energized, the display will show
X01 – On , otherwise it will display X01 – Off . Pressing
F1
will enter into the next Screen 4.1.a.3
& pressing
F2
will enter into the previous screen 4.1.a.1.
Start PB
X02 - Off
Screen 4.1.a.3
In this mode if the start push button for cycle start, mounted on the machine table is pressed, the
display w ill show
X02 – On , otherwise it will display X02 – Off .