Ametek TRACE ANALYTICAL ta5000R, User Manual

Page: 24 / 50

24 | Model ta5000R Gas Purity Monitor
INSTALLATION
In order to have a smooth installation of the ta5000R Gas Analyzer and
to get the maximum performance, several aspects should be considered.
This guide clarifies the important points for a successful installation.
Unpacking and Inspecting the ta5000R
Perform the following inspection to assure that the analyzer has not been
damaged during shipment.:
• Inspect the shipping container exterior for evidence of damage or indications
of excess moisture before unpacking.
• Carefully open the shipping container and remove the analyzer. Inspect
the exterior of the analyzer for noticeable damage.
• Do not discard the shipping container until installation is complete.
Upon receipt of the analyzer, check the interior of the shipping container
for the following items:
• Analyzer ta5000R and Power Cord
• Operating Manual
• Accessories purchased with the ta5000R
If any evidence of damage exists, immediately contact the shipping com-
pany, save the original shipping container, and notify Ametek as soon as
possible for consultation.
Location and Environment
1. The area where the ta5000R Gas Analyzer is to be operated should be
clean with minimum particulate matter and dust in the air. Install the in-
strument in an area where there are no vibrations to affect the electronics
and detectors. There should not be any draft directly on the instrument
from air conditioners or extreme temperature fluctuations in the room.