Ametek Sorensen XG 100-15, Operating Manual

Page: 22 / 399

Introduction
1-2 M370430-01 Rev F
Features and Options
The XG Family Programmable DC Power Supply provides stable,
variable output voltage and current for a broad range of development and
system requirements. The power supplies have a high power density and
numerous industry standard interfaces:

RS-232, RS-485, analog programming (APG), and USB built-in
ports.

Optional GPIB or Ethernet (ENET), isolated analog programming
(ISOL), control for remote operation and readback.

Seamless switching between front panel and any digital interface
(RS-232, RS-485, USB, GPIB or ENET).

Simultaneous digital displays for both voltage and current.

Front panel control by rotary Adjust/Enter knob, permitting high
resolution output setting.

Active Power Factor Correction (PFC) reduces input current and
input current harmonics.
 Automatic crossover system allowing the power supply to switch
between Constant Current, Constant Voltage and Constant Power
(available in version 2.21 and higher) operating modes.

Parallel or series connection among multiple units to produce
greater diversity or to use in higher power applications.
 Short-circuit protection of DC outputs provideing greater operating
safety.

Built-in APG and ISOL (optional) interface to provide a
galvanically isolated analog voltage control of the output,
master/slave output tracking, and remote Enable/disable for safety
and precision.

Remote output voltage sensing to automatically compensate for
cable losses.

Software calibrated.

Three user setting memory locations.

M10 Option preprograms the voltage to reset to zero upon power on
and upon output enable.