Setting Up the Machine and Hardware
9
LD Series Operation Manual
POGO TESTING
AMETEK produces a range of Lloyd Instruments machines that can be mounted on specially designed frames that can be used for testing a wide range of
bulky items such as cardboard cartons, crates, and furniture.
Machines configured with the POGO option have a linear bearing fitted in a fixed lower crosshead. A rod running through the crosshead connects the load
cell and compression platens which are mounted in the frame below the material testing machine.
Typical installation of an LD Series on a Pogo.
Preparing the LD Series for Pogo Testing
Note:
Since the size and specifications of Pogo mounting frames will vary depending on individual customer requirements, the following is a general proce-
dure for preparing the LD Series for Pogo testing. Refer to the instructions for set up and wiring supplied with your individual mounting frame.
X
To Prepare the LD Series for Pogo Testing
1
Position the Pogo mounting frame.
2
Fit the frame mounting plates to the LD Series.
!
CAUTION:
To avoid damage to the equipment and/or possible injury, AMETEK recommends that the fitting of the supplied frame mounting plates be
carried out by a Lloyd Instruments appointed commissioning engineer, trained to suit the requirements and needs of the customer.
