Setting Up the Machine and Hardware
8
LD Series Operation Manual
LIFTING
As the LD Series is heavy, please ensure utmost care is taken when lifting. Lifting equipment should be used as necessary.
Lifting With a Pallet
!
CAUTION:
The LD Series should never be lifted by placing hands under the frame.
The LD Series can have a pallet fitted under it so that it may be lifted to the desired position with a forklift hoist or suitable lifting trolley.
Lifting With Straps
Lifting straps may be situated under the moving crosshead. Ensure the crosshead is padded to avoid damage to the machine. Care should be taken to ensure
that the straps do not interfere with the load cell connection socket.
Lifting With a Forklift
An alternative method for lifting is the use of a forklift truck with the forks under the moving crosshead. Ensure the crosshead is well padded to avoid damage
to the machine. Ensure the forks do not damage the load cell socket.
SECURING THE LD SERIES TO A BENCH
The materials tester is heavy and cannot normally tip over. However, if there is the possibility that users can pull against the vertical column, then there is a risk
that the machine may be pulled over.
The LD Series materials tester can be secured to the bench using the four, threaded M8 holes in the base of the machine.
!
WARNING:
The LD Series must be secured to a rigid and stable supporting surface. Ignoring this requirement disregards the safety standards estab-
lished for the machine.
Note:
This requirement must be performed by an authorized Lloyd Instruments engineer.
