128797 05
2017-08-11
20
5.3
Measuring mA
The electrical parameter mA can be measured using the lower display.
Follow the principle of navigating through the functions as described in the guidelines in
section 4.2 to make the desired mA measurements:
1. Enter edit mode.
2. Select “Current” from the Lower Mode list.
3. Select the desired Test Mode (In) from the Test Mode list.
4. Select the desired Range from the Range list.
5. Select the desired power source from the Power Source list.
6. Select mA or % from the Units list.
7. Accept the selections and leave edit mode.
8. Connect the leads, as shown in Figure 3.
Figure 3
Measuring mA