Ametek Dycor CG1000-RTP, User Manual

Page: 36 / 96

4-2 | Dycor CG1000-RTP Oxygen Analyzer
Setup Key
Setup Key Menu Function/Options
display select info for display lines 1, 2 and 3
Passwords create a system password
set Pressure Define Process Pressure value
system Tests Perform internal diagnostics
system serial #
view serial number and manufacturing num-
ber
Thermal calibration
Perform a primary calibration. A primary cali-
bration is intended to extend the life of your
sensor. do not perform this type of calibration
unless specifically instructed to do so
carrier gas
Define which carrier gas is used to deliver your
calibration gases. This option also calibrates
your flow sensor.
communications Define communication parameters
Display
Define what information should appear on the top three display lines of
your analyzer display.
•
O
2
•
Cell temperature
•
Cell millivolts
•
Thermocouple millivolts (T/C millivolts)
•
Current date/time
•
User text
•
Turn off (leave display line blank)
•
Flow
Sometimes menu options can occupy Display Lines 3 and 4, and even
Display Line 2. Therefore, put the information that is most critical to
view on Display Line 1 and 2.
NOTE
